Polkadot provides a naming system that allows participants to add personal information to their on-chain account and subsequently ask for verification of this information by registrars.
Setting an Identity
Users can register some default fields like legal name, display name, website, Twitter handle, Riot handle, etc. along with extra, custom fields for which they would like attestations (see Judgements). Users must reserve funds in a bond to store their information on chain - 10 KSM per identity, and 2.5 KSM per each field beyond the legal name. These funds are locked, not spent - they are returned when the identity is cleared. Each field can store up to 32 bytes of information, so the data must be less than that. When inputting the data manually through the Extrinsics UI, a UTF8 to bytes converter can help.
The easiest way to add the built-in fields is to click the gear icon next to one's account and select "Set on-chain identity".
A popup will appear, offering the default fields.
To add custom fields beyond the default ones, use the Extrinsics UI to submit a raw transaction by
first clicking "Add Item" and adding any field name you like. The example below adds a field
which is a user's Steam username. The first value is the field
name in bytes ("steam") and the second is the account name in bytes ("theswader"). The display name
also has to be provided, otherwise the Identity pallet would consider it wiped if we submitted it
with the "None" option still selected. That is to say, every time you make a change to your identity
values, you need to re-submit the entire set of fields: the write operation is always "overwrite",
Note that custom fields are not shown in the UI by default:
The rendering of such custom values is, ultimately, up to the UI/dapp makers. In the case of PolkadotJS, the team prefers to only show official fields for now. If you want to check that the values are still stored, use the Chain State UI to query the active account's identity info:
It is up to your own UI or dapp to then do with this data as it pleases. The data will remain available for querying via the Polkadot API, so you don't have to rely on the PolkadotJS UI.
You can have a maximum of 100 custom fields.
Please note the following caveat: because the fields support different formats, from raw bytes to various hashes, a UI has no way of telling how to encode a given field it encounters. The PolkadotJS UI currently encodes the raw bytes it encounters as UTF8 strings, which makes these values readable on screen. However, given that there are no restrictions on the values that can be placed into these fields, a different UI may interpret them as, for example, IPFS hashes or encoded bitmaps. This means any field stored as raw bytes will become unreadable by that specific UI. As field standards crystallize, things will become easier to use but for now, every custom implementation of displaying user information will likely have to make a conscious decision on the approach to take, or support multiple formats and then attempt multiple encodings until the output makes sense.
Registrars can set a fee for their services and limit their attestation to certain fields. For example, a registrar could charge 1 DOT to verify one's legal name, email, and GPG key. When a user requests judgement, they will pay this fee to the registrar who provides the judgement on those claims. Users set a maximum fee they are willing to pay and only registrars below this amount would provide judgement.
Becoming a registrar
To become a registrar, submit a pre-image and proposal into Democracy, then wait for people to vote on it. For best results, write a post about your identity and intentions beforehand, and once the proposal is in the queue ask people to second it so that it gets ahead in the referendum queue.
Here's how to submit a proposal to become a registrar:
Go to the Democracy tab, select "Submit preimage", and input the information for this motion -
notably which account you're nominating to be a registrar in the
Copy the preimage hash. In the above image, that's
0x90a1b2f648fc4eaff4f236b9af9ead77c89ecac953225c5fafb069d27b7131b7. Submit the preimage by signing
Next, select "Submit Proposal" and enter the previously copied preimage hash. The
field needs to be at least 10 KSM. You can find out the minimum by querying the chain state under
Chain State -> Constants -> democracy ->
At this point, DOT holders can second the motion. With enough seconds, the motion will become a referendum which is then voted on. If it passes, users will be able to request judgement from this registrar.
After a user injects their information on chain, they can request judgement from a registrar. Users declare a maximum fee that they are willing to pay for judgement, and registrars whose fee is below that amount can provide a judgement.
When a registrar provides judgement, they can select up to six levels of confidence in their attestation:
- Unknown: The default value, no judgement made yet.
- Reasonable: The data appears reasonable, but no in-depth checks (e.g. formal KYC process) were performed.
- Known Good: The registrar has certified that the information is correct.
- Out of Date: The information used to be good, but is now out of date.
- Low Quality: The information is low quality or imprecise, but can be fixed with an update.
- Erroneous: The information is erroneous and may indicate malicious intent.
A seventh state, "fee paid", is for when a user has requested judgement and it is in progress. Information that is in this state or "erroneous" is "sticky" and cannot be modified; it can only be removed by complete removal of the identity.
Registrars gain trust by performing proper due diligence and would presumably be replaced for issuing faulty judgements.
To be judged after submitting your identity information, go to the
"Extrinsics UI" and select the
identity pallet, then
requestJudgement. For the
reg_index put the index of the registrar you want to be judged by, and
max_fee put the maximum you're willing to pay for these confirmations.
If you don't know which registrar to pick, first check the available registrars by going to
"Chain State UI" and selecting
identity.registrars() to get the full list.
The image above reveals two registrars:
- Registrar 0, FcxNWVy5RESDsErjwyZmPCW6Z8Y3fbfLzmou34YZTrbcraL charges 25 KSM per judgement
- Registrar 1, Fom9M5W6Kck1hNAiE2mDcZ67auUCiNTzLBUdQy4QnxHSxdn charges 5 KSM per judgement
To find out how to contact the registrar after the application for judgement or to learn who they are, we can check their identity by adding them to our Address Book. Their identity will be automatically loaded.
Gavin Wood is registrar #0.
Chevdor is registrar #1. We pick that one.
This will make your identity go from unjudged:
At this point, direct contact with the registrar is required - the contact info is in their identity as shown above. Each registrar will have their own set of procedures to verify your identity and values, and only once you've satisfied their requirements will the process continue.
Once the registrar has confirmed the identity, a green checkmark should appear next to your account name with the appropriate confidence level:
Note that changing even a single field's value after you've been verified will un-verify your account and you will need to start the judgement process anew. However, you can still change fields while the judgement is going on - it's up to the registrar to keep an eye on the changes.
Users can also link accounts by setting "sub accounts", each with its own identity, under a primary account. The system reserves a bond for each sub account. An example of how you might use this would be a validation company running multiple validators. A single entity, "My Staking Company", could register multiple sub accounts that represent the Stash accounts of each of their validators.
An account can have a maximum of 100 sub-accounts.
To register a sub-account on an existing account, you must currently use the
Extrinsics UI. There, select the identity pallet, then
setSubs as the function to use. Click "Add Item" for every child account you want to add to the
parent sender account. The value to put into the Data field of each parent is the optional name of
the sub-account. If omitted, the sub-account will inherit the parent's name and be displayed as
parent/parent instead of
Note that a deposit of 2.5KSM is required for every sub-account.
Clearing and Killing
Clearing: Users can clear their identity information and have their deposit returned. Clearing an identity also clears all sub accounts and returns their deposits.
Clearing is done through the Extrinsics UI.
Killing: The Council can kill an identity that it deems erroneous. This results in a slash of the deposit.